Post-Processing Software
Fast data post-processing and final product creation

True View EVO Software

True View EVO is the software used to post-process your raw flight data. EVO will generate a 3D LIDAR point cloud in LAS format, colorize the point cloud, and geotag the images collected. It is based on GeoCue’s LIDAR point cloud exploitation software, LP360, and comes with all the same tools as LP360 Advanced. Tools such as accuracy assessment, automatic and manual ground classification, and contour/ surface exporting. 

True View EVO gives mappers and surveyors the ability to deliver high quality analytic data with exacting accuracies. True View EVO lets users ingest data from a True View sensor and process to end products without the need to employ other software applications. This is a huge reduction in workflow complexity and a big-time saver.

High-Quality Deliverables

  • Ground Classified Point Clouds

  • Digital Elevation Models (DEMs)

  • Cross Sections

  • Topographic Contours

  • Volumetric Analysis and more

True View EVO 3D Colorized Point Cloud Viewer
True View 410 Data Collect

How it Works

Data are written to a USB memory stick on the True View 3DIS and imported into True View EVO using a simple import wizard. Immediately upon import, you are presented with a map view of the project, showing the entire flight line. Another wizard directly in EVO takes you through the Applanix POSPac flow, creating the high accuracy trajectory that will be used to position imagery and LIDAR points. Automated tools are included that make short work of defining the segments of the trajectory that you want to process into flight lines. Generation of LAS points and colorization are fully automatic. The system is so efficient you can move from raw data import to colorized point cloud for a 20 hectare/50-acre site in less than 20 minutes.

Assess and Report Your LIDAR Data

Assessing, correcting and reporting geometric accuracy is critical to metric mapping workflows. True View EVO contains tools to assess/report network accuracy according to American Society for Photogrammetry and Remote Sensing (ASPRS) standards, measure hard surface precision and geometrically adjust LIDAR data.

True View EVO License Levels

True View EVO is a 64-bit Windows® desktop application used for processing and exploiting True View sensor data. It is GeoCue’s LP360 point cloud exploitation product with the addition of a collection of tools for True View sensor data workflows. Currently, True View Evo is available in three licensing levels:

EVO Lite

Enables PPK processing for guest systems, such as the DJI P4RTK and DJI P1 (M300 RTK). This is the next generation ASPSuite Advanced and is equivalent to LP360 Standard with the addition of the True View workflow tools.  It is limited to product areas of no more than 4 km2 of LIDAR data.


This is equivalent to LP360 Advanced with the addition of the True View workflow tools.  It is limited to product areas of no more than 4 km2 of LIDAR data.

EVO Unlimited

This is license level has the same functionally as True View EVO, but the size limit is removed.

EVO Feature Highlight : EVO Explorer

EVO Explorer is a new software licensing level we are developing. This will be a free viewer aimed at users who want to review data collected by a True View sensor (including True View Guest Sensors such as the Phantom 4 RTK).

True View EVO Capabilities



EVO Lite


EVO Unlimited

Visualization of All LAS Attributes as Points and Surface Models

On-the-fly Surface Rendering (TIN) and Contouring with Break-in Enforcement

Integrated and Synchronized 3D and Profile Windows

Seamless Management of Thousands of LAS Files

Display all True Pose images that “see” a 3D Point

PPK Processing for DJI P4 RTK and DJI P1 (M300 RTK)

Management of sensor calibration files in True View Reckon

Breakline Enforcement of Surface Models

Extensive Quality Check Tools

Export Derived Products: Rasters, Contours, Analytic View, etc.

Interactive Classification Tools

Classify by Features: including 3D Points, Lines and Polygons

Convert 2D Vectors to 3D by Automated Surface Elevation and Extraction

Breakline Digitization Tools for Variety of Constraint Conditions

Extensive 3D Feature Edit Tools

Volumetric Analysis Tools

Cross-section Generation and Export

Automatic Stockpile Toe Extraction

Full End-to-End Processing for True View 3D Imaging Sensor

Automatic Ground Classification and Model Key Point Creation Tools

Automatic Planar Surface & Building Footprint Extraction

Automatic Powerline Classification

Note: True View Unlimited has the same features as True View EVO but removes 4km2 project size restriction

How Can We Help Your Business?