Search Our Resource Collection

Geocue Article

10/20/20

Our longtime partner, Firmatek, walks us through a ground topography scanning project using GeoCue's True View 3D Imaging System (3DIS). Read more...

Geocue Article

06/17/20

GeoCue Group announces the release of their new True View® 615 and True View 620 UAS LIDAR/Imagery 3D imaging systems (3DIS). GeoCue’s True View 615 & 620 are equipped with RIEGL’s miniVUX-2UAV laser scanner integrated with dual photogrammetric cameras. Position and Orientation is provided by an Applanix APX-15 (True View 615) or extreme accuracy APX-20 (True View 620). Read more...

Geocue Article

06/04/20

The note this week is aimed at mapping and survey service providers. Even so, government users would do the same computations, but with a proxy for profit such as “Does this make things better, faster, cheaper for my stakeholders?” Read more...

Geocue Article

05/29/20

A brief demonstration of the new smoothing tool we have added to LP360. In this demonstration we show several examples of the smoothing using data from UAV LIDAR systems. Pros and cons of smoothing vs. thinning and using classified or unclassified points will also be discussed. Read more...

Geocue Article

05/28/20

If you want to do work where noise can be objectionable such as profiling a road surface, what are your choices other than purchasing a survey grade instrument such as our soon-to-be-released True View 615/620? Ah, there is another approach! Read more...

Geocue Article

05/13/20

GeoCue's True View 410 is a 3D Imaging System (3DIS) Mapper, LIDAR Mapper, and Photogrammetric Mapper making it this system a 3-in-1 mapping sensor. Read more...

Geocue Article

05/13/20

During this seminar we flow data from the raw cycle information to a colorized point cloud. Accuracy considerations will include network accuracy, strip-to-strip assessment, hard surface “noise” and general qualitative data inspection. This webinar will feature live demonstrations of True View Evo post-processing software. Read more...

Geocue Article

05/06/20

GeoCue President/CTO, Lewis Graham, responds to the posed statement UAV LIDAR is not a simple upgrade from photogrammetry. Rebuttalling UAV LIDAR is not difficult! Read more...

Geocue Article

04/29/20

GeoCue presents a case example for using UAV LIDAR versus photogrammetry for volumetric inventory application aimed to improve your ROI. Read more...

Geocue Article

03/04/20

GeoCue presents a simple situation where a user wants to measure volume of a stockpile scenario to highlight basic volumetric analysis collected with 3D Imaging Sensor, True View 410 and processing with True View Evo. Read more...

Geocue Article

02/24/20

We always realized the advantage of quick processing but now a few customers are as well. We have recently been involved in two separate operations where rapid “flight to data” was a requirement. Read more...

Geocue Article

02/20/20

During this webinar we will flow data from the raw cycle information to a colorized point cloud. Accuracy considerations will include network accuracy, strip-to-strip assessment, hard surface “noise” and general qualitative data inspection. This webinar will feature live demonstrations of True View Evo post-processing software. Read more...

Geocue Article

02/17/20

As an example, we will run ground classification on a highway project we recently flew for the Alabama Department of Transportation (AL DOT). During a heavy rain, a section of Alabama route 231 was heavily damaged by ground sliding under the pavement. We were asked to do a True View 410 flight and provide a ground model. Read more...

Geocue Article

02/10/20

Do not be satisfied with only a network vertical accuracy report for your LIDAR data. This will only reveal horizontal issues if the check points were placed on sloped surfaces. Read more...

Geocue Article

02/06/20

During this presentation, we will discuss the value of colorized LIDAR point clouds in analyzing surface mine site data. We will illustrate the general steps required to collect site data from mission planning through analytic data collection in True View Evo, showing the productivity gains of automatic ground classification, stockpile toe collection and overhead structure classification. As with all True View workflows, particular attention will be given to metric accuracy. Read more...

Geocue Article

02/06/20

One of the “sweet spot” application areas for GeoCue’s True View 410 3D imaging Sensor for drone mapping is land development planning. We will consider the example of a general contractor who needs an accurate elevation model to provide the site works subcontractor. In this webinar, we will follow a True View workflow from mission planning through product generation for siting a new building on a heavily vegetated lot. This webinar will feature live demonstrations of the True View Evo software workflow as well as provide a few tips for successfully performing this type of drone LIDAR/Imaging mapping project. Read more...

Geocue Article

02/06/20

Please join us for a presentation of the True View Evo post-processing workflow for GeoCue’s new True View 410 LIDAR/Imagery fusion sensor (3D Imaging Sensor). The workflow will begin with data transfer from the sensor and move through the steps required to produce a colorize, 3D LIDAR point cloud. In addition to the workflow demonstration, we will also discuss some of the derived products that can be generated within True View Evo. Read more...

Geocue Article

07/25/19

GeoCue Group's President/CTO takes a deep dive into the technical specifications and business models of the new True View 410 sensor. Read more...

Geocue Article

10/23/17

One of the most common questions we are asked by our customers is, “how much data processing should I do myself?” Here, we break down the two major problems that companies often experience when they bring data processing in-house. Read more...

How Can We Help Your Business?