LiDAR Articles

How to Choose an Aerial Platform for Your LiDAR Sensor

A GeoCue guide to drone platforms for LiDAR mapping, surveying, and photogrammetry

Our TrueView 3D Imaging Sensors were designed as lightweight payloads to allow flexible integrations on numerous drone platforms. We have worked with several drone providers to provide customers with the complete drone mapping solution they are looking for. The drone you’d take to map a construction site may be different from the one you’d take to survey a long transmission corridor. Start with what you need to capture, then look for an aircraft that fits the work.

At GeoCue, we’re drone agnostic. We designed our TrueView 3D Imaging Sensors to work across a range of aircraft. Generally speaking, if a platform can carry the weight of the payload, we can work with you and the manufacturer on an integration. We’ll check how the sensor mounts, how it gets power, and what the setup needs for data collection. If you already fly a drone you know well, that’s a good place to start.

What to Check Before Choosing a Drone

Start with the total weight of what you’ll fly. Include the LiDAR sensor, any separate camera or antenna, the mounting hardware, and cables. Then ask the manufacturer how much flight time you can expect with that setup on board. That number will help you plan how many flights and battery swaps a site will take.

A compact multirotor can make sense when you’re moving between several sites in a day. A heavier sensor or a multi-sensor setup may call for a heavy-lift aircraft. For a long corridor or a large site, look at how much ground you can cover per flight at your planned altitude, speed, and flight-line spacing. Factor in your launch and landing area and any equipment requirements specified by your customer or contract.

Drone Manufacturers and Platforms

Here are the manufacturers GeoCue works with, in alphabetical order. The platforms below give you a look at each company’s lineup. Ask us to confirm the mount and integration for your specific TrueView sensor and aircraft model.

Acecore Technologies

Based in the Netherlands, Acecore builds carbon-fiber multirotors around modular payloads. Its Zoe X4 and Zoe X8 are field-portable aircraft for work such as surveying and inspection. The electric Noa is a heavy-lift hexacopter, while the gas-electric Noa Hybrid is designed for missions that call for longer flight times. Acecore also offers the Zetona, which uses a front-mounted camera gimbal for close visual inspections.

Explore Acecore platforms

Censys Technologies

Based in Daytona Beach, Florida, Censys Technologies builds fixed-wing aircraft with vertical takeoff and landing (VTOL) capabilities for surveying and infrastructure inspection. Its Sentaero 6 is designed for Beyond Visual Line of Sight (BVLOS) missions, with a manufacturer-listed range of 80+ miles per flight. Payload options include mapping cameras and LiDAR sensors, including the GeoCue TrueView 540, for collecting imagery and point clouds along utility corridors and across large sites.

Censys also offers automated docking, CensWise AI analytics software, and Drones as a Service, through which its team operates the aircraft and handles data collection and analysis.

Explore the Censys Sentaero 6

CHCNAV

CHC Navigation develops positioning, navigation, and mapping equipment. Its X500 is a survey quadcopter with RTK positioning and a manufacturer-rated payload capacity of up to 5 kg. It’s designed to carry LiDAR and camera payloads for aerial mapping.

Explore the CHCNAV X500

Clogworks

Akhter-Clogworks designs and builds its Dark Matter multirotors in the United Kingdom. The lineup includes the Dark Matter qD quadcopter, the Dark Matter hX hexacopter, and the folding Dark Matter Star quadcopter. The qD and hX are both offered in Gen 3 configurations. GeoCue and Clogworks have integrated the TrueView 535 with a Dark Matter hexacopter for aerial LiDAR mapping.

Explore Clogworks aircraft

DJI

DJI’s enterprise Matrice series includes the Matrice 300 RTK, Matrice 350 RTK, and Matrice 400. These multirotors are used for surveying, mapping, and infrastructure inspection. If you already fly one of these aircraft, GeoCue publishes TrueView mounting instructions for all three. Check the guide for your aircraft to see which mounting hardware your sensor requires.

For U.S. customers, the FCC’s Covered List rules affect new equipment authorizations. FCC guidance says previously authorized models can generally continue to be imported, sold, and used.

Explore the DJI Matrice series

Freefly Systems

Freefly Systems manufactures US-built, NDAA-compliant and Blue UAS-certified commercial drones engineered for aerial mapping, LiDAR scanning, inspection, and heavy-lift operations. Their current lineup centers on two modular aircraft families—the compact Astro series and the heavy-lift Alta X series, both sharing the Smart Dovetail quick-release payload mount and the Pilot Pro controller.  The Alta X and Alta X Gen2 are heavy-lift quadcopters with folding airframes and room for larger sensor packages.

Explore Freefly platforms

Harris Aerial

Harris Aerial is an American manufacturer of heavy-lift, NDAA-compliant unmanned aerial vehicles (UAVs) based in Casselberry, Florida.  The Carrier H6 comes in three versions with different power systems. The H6 Electric runs on batteries, the H6 Hybrid EFI uses a gasoline generator, and the H6 Hydrone uses a hydrogen fuel cell. Those options are worth a look if your survey work includes both individual sites and longer corridors.

The lineup also includes the heavy-lift H6HL, the coaxial HX8, and the HX8 Tether for sustained operations from a fixed location. Harris Aerial lists the compact H4C Quad for preorder.

Explore the Harris Aerial Carrier fleet

Inspired Flight Technologies

Inspired Flight Technologies is an American manufacturer of commercial and government unmanned aircraft systems (UAS) based in San Luis Obispo, California. Founded in 2017, the company specializes in NDAA-compliant and DoD Blue UAS-cleared multirotor drones engineered for enterprise surveying, utility inspection, and defense operations.

The IF800 Tomcat is a folding quadcopter that can carry LiDAR or camera payloads and packs down for transport. The IF1200, also documented as the IF1200A, is a heavy-lift hexacopter for larger sensors. GeoCue provides TrueView mounting guidance for both aircraft.

Explore Inspired Flight aircraft

MAVTech

MAVTech began as a spin-off from Italy’s Politecnico di Torino and develops standard and custom aircraft. Its RX3 is a portable quadcopter for lightweight cameras and sensors. The Q4X is a multipurpose quadcopter with a shared payload interface and a manufacturer-rated capacity of up to 6 kg. MAVTech shows LiDAR among the Q4X payload options and offers the M4X for larger loads.

Explore MAVTech aircraft

Nolvis

Nolvis is a Dallas, Texas-based industrial drone manufacturer specializing in commercial UAVs for infrastructure inspection, surveying, and mapping. The M1 is an RTK-equipped drone for outdoor surveying, mapping, and inspection. It has a swappable payload mount rated for up to 2.5 kg, and Nolvis lists LiDAR and inspection payloads as options to discuss with its team. The company also makes the caged X1 for visual inspections inside confined spaces such as tanks and vessels.

Explore Nolvis aircraft

Real-time Robotics

Real-time Robotics (RtR) is a California-based aerospace company that designs and manufactures heavy-lift, backpack-portable unmanned aerial vehicles (UAVs). Its HERA packs into a backpack and supports up to four payloads at once. The VEGA is a larger heavy-lift aircraft for missions with more equipment on board. GeoCue has announced TrueView compatibility with both platforms.

Explore Real-time Robotics aircraft

Skyfront

Skyfront is a Silicon Valley company that builds NDAA-compliant, US-made, gas-electric multirotors for extended flights. Its Perimeter 8 and Perimeter 8+ use an onboard engine to generate electricity for the rotors. Skyfront publishes flight-time estimates for several payload weights, which can help teams plan corridor surveys or figure out how much of a large site they can cover in one flight.

Explore Skyfront Perimeter aircraft

UCANDRONE

Greek manufacturer UCANDRONE develops unmanned systems and provides aerial surveying and mapping services. Its aircraft include Mera and the fixed-wing Phoreas, both developed for applications that include aerial photography and remote sensing. Through its Unmanned on Demand program, UCANDRONE also designs custom aircraft around a customer’s payload and mission requirements.

Explore UCANDRONE

Vision Aerial

Vision Aerial is an American manufacturer of industrial unmanned aerial systems (UAS) headquartered in Bozeman, Montana. Founded in 2013, Vision Aerial designs, builds, and supports rugged, NDAA-compliant commercial drones entirely in the United States.

The SwitchBlade-Elite and Vulcan SX are medium-lift tricopters. The Vector is a heavy-lift hexacopter with field-swappable payloads. The company also lists the heavy-lift Vulcan YX for preorder.

Explore Vision Aerial aircraft

Xer Technologies

Xer Technologies develops hybrid-electric multicopters in Switzerland for industrial and other long-duration missions. The X8 PRO, which succeeded the original X8, is designed for extended flights such as power line and pipeline inspections. Xer also introduced the X12, a heavy-lift hybrid platform developed for maritime and overland operations.

Explore the Xer X8 PRO · Read the X12 announcement

Let’s Find a Setup for Your Project

Already flying a drone you’d like to keep using? Have a TrueView sensor in mind? Tell us about the aircraft model, the sensor you want to fly, and the kind of work you’re doing. We can help you check fit, identify mounting hardware, and talk through a custom integration if your aircraft isn’t listed here.

Talk to a GeoCue LiDAR expert

For more information with one of our LiDAR experts.