TrueView 655/660 3D imaging system with three cameras, better point density and dual drone and optional mobile mapping capability

The TrueView® 655/660 is GeoCue’s third generation RIEGL integration built with the miniVUX-3UAV and triple mapping cameras (right, left, nadir) for high accuracy mapping with excellent vegetation penetration and wire detection in a lightweight payload package. In addition, you can upgrade to high-resolution Sony RX1R2 or Sony a7r imaging camera for even higher performance.

All 600-series payloads, are NDAA-compliant and can be upgraded to accommodate dual purpose drone and mobile mapping.

Specification Data Collection	Value LiDAR + Imagery
Specification LiDAR Scanner	Value RIEGL miniVUX-3UAV
Specification LiDAR Beams/Returns	Value Up to 5 per outgoing pulse
Specification LiDAR Range - usable	Value 100 m for targets with > 20% reflectivity
Specification Positioning and Orientation System	Value (655) Applanix APX-15 \| (660) Applanix APX-20
Specification Pulse Repetition Rate	Value Up to 300 kHz (selectable)*
Specification Scanner Performance	Value Precision: 10 mm Accuracy: 15 mm
Specification GNSS/INS Performance	Value 655 Position: 20-50 mm Angle: 0.025 deg Roll/Pitch, 0.08 deg Heading 660 Position: 20-50 mm Angle: 0.015 deg Roll/Pitch, 0.035 deg Heading
Specification System Performance	Value Precision observed on one Strip: Typical 20 mm, Less than 15 mm (1 sigma) observed at 75 m on concrete Accuracy: Typical 3 cm RMSE, better than 5 cm 3D RMSE – depending on GNSS conditions, accuracy of control points and coordinate system
Specification Camera Sensor	Value 3 Sony IMX-183: 1”, 20 MP, RGB -> 60 MP per payload ***Optional upgrade to high-resolution Sony RX1R2 or Sony a7r. Ask your salesperson for details.
Specification Mass	Value (655) 2.44 kg \| (660) 2.6 kg (IMU-90) or 2.8 kg (IMU-82) (with standard 3 camera package) (payload unit only - no accessories including battery, mount, antenna, power adapter)

Flexiblity in field with optional mobile vehicle mount

In your mix of projects, do you encounter times when you cannot fly, perhaps due to busy high-population areas or other factors? Use this sensor in mobile mapping mode.

Or, do you need multiple perspectives with greater detail? Use both drone and mobile LiDAR modes. It’s the best of both worlds, to recreate your world!

Featured applications

Rail Inspection

Wire Extraction - Distribution

Road Design

What's included

Accessories Parts

TrueView 655/660 LiDAR Sensor Payload

USB Thumbdrive

GNSS Antenna

Sensor Hardcase

Concentric Target

Software/Data Management

LP360 Drone Processing Software

Includes Strip Align and Photo Add Ons

Support

1 year of hardware and software support

2 days of included training at our Huntsville, AL office

Add-ons

Looking for drone mapping equipment and accessories? GeoCue sells mounting kits, batteries, drones, base stations and spare parts partnered with our bundled solutions. Contact our sales team to discuss all your equipment needs.

Drones/Integrations

Mounting kits

Financing

Spare Parts

Base stations

Mobile Mapping Options

Accuracy Star

Software Integrations

	LP360 Drone	Photo	Strip Align	3D Accuracy	Sensor Processing
TrueView Rental
TrueView 435
TrueView 435 SaaS
TrueView 515
TrueView 535
TrueView 625
TrueView 655/660
TrueView 680
TrueView 720

LP360 Drone

Drone LiDAR and photo processing workflow made simple

Use LP360 Drone for

Intuitive workflow
Multi-flight import and processing
GIS interface allowing combination with other geospatial data
Powerful point cloud visualization with multiple and synchronized windows

LP360 Photo

We have integrated directly into our drone mapping processing software, LP360 Drone, a Photo engine to produce fast backdrop orthophotos for your LiDAR project.

LP360 Photo is the LP360 Drone add-on for Ortho mapping:

Rapidly create your orthophoto backdrop in a completely integrated workflow
Efficient fast processing leveraging the LiDAR data with the photos?

LP360 Photo additional features:

Export photo package to your 3^rd party Photogrammetry software
Support most common 3^rd party sensors (DJI Mavic 3E, DJI Phantom 4 RTK and DJI Zenmuse P1)

LP360 Strip Align

Data can exhibit small geometric inconsistence, especially when combining data from multiple flights. Strip Align for LP360 Drone detects and corrects these errors via an application of sensor-specific mathematical modeling. Strip Align is a fully automated process with no need for users to set project-specific “tuning” parameters or to move in and out of the LP360 Drone processing environment – press a button and it works!

LP360 3D Accuracy

Automated horizontal and vertical checks remove the need for manual interaction

Use 3D Accuracy for:

Automatically transform your check point coordinates into you project coordinates including datum and epoch
“AutoTarget” – Automatically find a 3D target on a drone dataset
Calculation of correction for any 3D target
Seamless workflow to apply the correction on the point cloud
Use with ground control equipment

Drone Platforms

Our TrueView 3D Imaging Sensors were designed as a lightweight payload to allow flexible integrations on numerous drone platforms. We have worked with several drone providers to provide customers the complete drone mapping solution they are looking for. Don’t see the company you’re looking for, contact our team and we can discuss custom integrations!