Meet TrueView 680/680LR, with Three Cameras for Better Range and Point Density

The TrueView 680/680LR is GeoCue's best 360 degree field of view system, built with the Riegl VUX-1UAV and the 680LR integrates a Riegl VUX-1LR. Select the system that best suits your projects and trust that you will achieve incredible performance in terms of accuracy and point density.

All 600-series payloads, are NDAA-compliant and can be upgraded to accommodate dual purpose drone and mobile mapping.

Specification
Data Collection
Value
LiDAR + Imagery
Specification
LiDAR Scanner
Value
(680) RIEGL VUX-1UAV-22​ | (680LR) RIEGL VUX-1LR-22
Specification
Laser Returns
Value
Up to 7 (680) I 5 (680LR)
Specification
Positioning and Orientation System
Value
Applanix APX-20
Specification
Pulse Repetition Rate
Value
(680) 800 kHz @ 120 m​ | (680LR) 1500 kHz@120 m
Specification
Scanner Performance​
Value
680
  • Precision: 5 mm
  • Accuracy: 10 mm
680LR
  • Precision: 5 mm
  • Accuracy: 15 mm
Specification
GNSS/INS Performance​
Value
  • Position: 20-50 mm
  • Angle: 0.015 deg Roll/Pitch, 0.035 deg Heading
Specification
System Performance​
Value
  • Precision observed on one Strip: Typical 10 mm, Less than 10 mm (1 sigma) observed at 80 m on concrete​
  • Accuracy: Typical 3 cm RMSE, better than 5 cm 3D RMSE – depending on GNSS conditions, accuracy of control points and coordinate system
Specification
Camera Sensor
Value
3 Sony IMX-183: 1”, 20 MP, RGB -> 60 MP per payload​
Specification
Mass
Value
4.97 kg (payload unit only - no accessories including battery, mount, antenna, power adapter)

Flexiblity in field with optional mobile vehicle mount

In your mix of projects, do you encounter times when you cannot fly, perhaps due to busy high-population areas or other factors? Use this sensor in mobile mapping mode.

Or, do you need multiple perspectives with greater detail? Use both drone and mobile LiDAR modes. It’s the best of both worlds, to recreate your world!

Featured applications

Rail Inspection
Wire Extraction - Distribution
Road Design
Hydro Projects
Mining

What's included

Accessories Parts
TrueView 680/680LR 3D LiDAR Payload
USB Thumbdrive
GNSS Antenna
Sensor Hardcase
Software/Data Management
LP360 Drone Processing Software

Includes Strip Align and Photo Add Ons

Support
1 year of hardware and software support
2 days of included training at our Huntsville, AL office

Add-ons

Looking for drone mapping equipment and accessories? GeoCue sells mounting kits, batteries, drones, base stations and spare parts partnered with our bundled solutions. Contact our sales team to discuss all your equipment needs.
Drones/Integrations
Mounting kits
Financing
Insurance
Spare Parts
Base stations
Mobile Mapping Options

Software Integrations

LP360 DronePhotoStrip Align3D Accuracy
TrueView Rental
TrueView 435
TrueView 435 SaaS
TrueView 515
TrueView 535
TrueView 625
TrueView 655/660
TrueView 680/680LR
TrueView 720

LP360 Drone

Drone LiDAR and photo processing workflow made simple

Use LP360 Drone for

  • Intuitive workflow
  • Multi-flight import and processing
  • GIS interface allowing combination with other geospatial data
  • Powerful point cloud visualization with multiple and synchronized windows

LP360 Photo

We have integrated directly into our drone mapping processing software, LP360 Drone, a Photo engine to produce fast backdrop orthophotos for your LiDAR project.

LP360 Photo is the LP360 Drone add-on for Ortho mapping:

  • Rapidly create your orthophoto backdrop in a completely integrated workflow
  • Efficient fast processing leveraging the LiDAR data with the photos?

LP360 Photo additional features:

  • Export photo package to your 3rd party Photogrammetry software
  • Support most common 3rd party sensors (DJI Mavic 3E, DJI Phantom 4 RTK and DJI Zenmuse P1)

LP360 Strip Align

Data can exhibit small geometric inconsistence, especially when combining data from multiple flights. Strip Align for LP360 Drone detects and corrects these errors via an application of sensor-specific mathematical modeling. Strip Align is a fully automated process with no need for users to set project-specific “tuning” parameters or to move in and out of the LP360 Drone processing environment – press a button and it works!

LP360 3D Accuracy

Automated horizontal and vertical checks remove the need for manual interaction

Use 3D Accuracy for:

  • Automatically transform your check point coordinates into you project coordinates including datum and epoch
  • “AutoTarget” – Automatically find a 3D target on a drone dataset
  • Calculation of correction for any 3D target
  • Seamless workflow to apply the correction on the point cloud
  • Use with ground control equipment

Drone Platforms

Our TrueView 3D Imaging Sensors were designed as a lightweight payload to allow flexible integrations on numerous drone platforms. We have worked with several drone providers to provide customers the complete drone mapping solution they are looking for. Don’t see the company you’re looking for, contact our team and we can discuss custom integrations!

Frequently asked questions