Case Studies

Volumetric Analysis with EVO
Volumetric Analysis with EVO

A user wants to measure volume of a stockpile scenario to highlight basic volumetric analysis collected processing with True View EVO.

READ MOREabout Volumetric Analysis with EVO

UAV LIDAR/Imagery Sensor True View 410 in Rapid Response
UAV LIDAR/Imagery Sensor True View 410 in Rapid Response

We always realized the advantage of quick processing but now a few customers are as well. We have recently been involved in two separate operations where rapid "flight to data" was a requirement.

READ MOREabout UAV LIDAR/Imagery Sensor True View 410 in Rapid Response

Mining and Construction: Stockpile with Vegetation
Mining and Construction: Stockpile with Vegetation

Using Loki direct positioning system and LP360, Wiregrass has performed hundreds of site mapping missions for quarries, asphalt plants, and construction projects. Photogrammetry has been an invaluable tool, however on less active sites where stockpiles become overgrown with vegetation and overburden volumes need to be computed in vegetated areas, photogrammetry is not enough. These are clearly situations where LIDAR is the right tool for the job.

READ MOREabout Mining and Construction: Stockpile with Vegetation

Flood Risk Analysis: City of Miami Beach
Flood Risk Analysis: City of Miami Beach

We all have Global Warming fatigue, but a look at the shoreline in very expensive neighborhoods of Miami Beach, Florida using a True View 3DiS really brings home the concern. The City of Miami Beach, one of our first True View 410 customers, is very concerned about the height of seawalls in its canal neighborhoods.

READ MOREabout Flood Risk Analysis: City of Miami Beach

LIDAR Bluff Profile Analysis
LIDAR Bluff Profile Analysis

This case study takes a look at how we re-measured the Lake Michigan bluffs relatively quickly and cost-effectively using LIDAR data in LP360.

READ MOREabout LIDAR Bluff Profile Analysis

Identifying Building Heights Using LIDAR Data
Identifying Building Heights Using LIDAR Data

The City of Franklin sought out our GIS department to help the city identify any buildings over three stories tall within city limits. This case study takes a detailed look at how we were able to use LIDAR data in LP360 to provide the height information needed for each structure.

READ MOREabout Identifying Building Heights Using LIDAR Data

LIDAR for Building Elevation Data
LIDAR for Building Elevation Data

When Hernando County Florida needed 3D model of the City of Brooksville, it turned to the Southwest Florida Water Management District (SWFWMD) office for help in getting the estimated building heights. This case study examines how they used LP360 to extract building elevation information from LIDAR data.

READ MOREabout LIDAR for Building Elevation Data