The TrueView 545 Features a New 45 Megapixel Camera and Unlimited PP-RTX, Removing the Need for a Base Station

The TrueView 545 is a premium LiDAR system that builds upon the success of the TrueView 535 with 3 integrated cameras including a new higher performance 45 megapixel nadir camera, bringing unmatched levels of resolution to photogrammetry and LiDAR projects. The system also includes unlimited access to PP-RTX eliminating the time-consuming need to set up a base station in the field.

Data Collection
LiDAR + Imagery
Laser Scanner
Hesai XT32M2X
LiDAR Range - Usable
120 m @ 20% reflectivity
LiDAR Beams/Returns
Cross-track Field of View (FOV)/Combined
In-track FOV
40.3° (-20° to +19.5°)
Pulse Repetition Rate
640 kHz
Scanner Performance
  • Precision: 5 mm
  • Accuracy: 20 mm
GNSS/INS Performance
  • Position: 20-50 mm
  • Angle: 0.025 deg Roll/Pitch, 0.08 deg Heading
System Performance
  • Precision observed on one Strip: Typical 20 mm, Less than 15 mm (1 sigma) observed at 75 m on concrete
  • Accuracy: Typical 3 cm RMSE, better than 5 cm 3D RMSE – depending on GNSS conditions, accuracy of control points and coordinate system
Camera Sensor
Two 26 MP oblique and a 45 MP nadir camera in the center
System Operation Temperature Range
-15° to 50° C
1.88 kg (payload unit only - no accessories including battery, mount, antenna, power adapter)
* 1 σ @ 50 m, nadir and with Strip Align

Flexiblity in field with optional mobile vehicle mount

In your mix of projects, do you encounter times when you cannot fly, perhaps due to busy high-population areas or other factors? Use this sensor in mobile mapping mode.

Or, do you need multiple perspectives with greater detail? Use both drone and mobile LiDAR modes. It’s the best of both worlds, to recreate your world!

Featured applications

Rail Inspection
Wire Extraction - Distribution
Pipeline Inspection
Airborne survey of Urban Environments

What's included

Accessories Parts
TrueView 545 3D LiDAR Payload
USB Thumbdrive
GNSS Antenna
Sensor Hardcase
Concentric Target
Software/Data Management
LP360 Drone Processing Software

Includes Strip Align, Photo, 3D Accuracy Add Ons

1 year of hardware and software support
2 days of included training at our Huntsville, AL office


Looking for drone mapping equipment and accessories? GeoCue sells mounting kits, batteries, drones, base stations and spare parts partnered with our bundled solutions. Contact our sales team to discuss all your equipment needs.
Mounting kits
Spare Parts
Base stations
Mobile Mapping Options
Accuracy Star

Software Integrations

LP360 DronePhotoStrip Align3D Accuracy
TrueView Rental
TrueView 515
TrueView 535/545
TrueView 540
TrueView 585
TrueView 625
TrueView 655/660
TrueView 680/680LR
TrueView 720

LP360 Drone

Drone LiDAR and photo processing workflow made simple

Use LP360 Drone for

  • Intuitive workflow
  • Multi-flight import and processing
  • GIS interface allowing combination with other geospatial data
  • Powerful point cloud visualization with multiple and synchronized windows

LP360 Photo

We have integrated directly into our drone mapping processing software, LP360 Drone, a Photo engine to produce fast backdrop orthophotos for your LiDAR project.

LP360 Photo is the LP360 Drone add-on for Ortho mapping:

  • Rapidly create your orthophoto backdrop in a completely integrated workflow
  • Efficient fast processing leveraging the LiDAR data with the photos?

LP360 Photo additional features:

  • Export photo package to your 3rd party Photogrammetry software
  • Support most common 3rd party sensors (DJI Mavic 3E, DJI Phantom 4 RTK and DJI Zenmuse P1)

LP360 Strip Align

Data can exhibit small geometric inconsistence, especially when combining data from multiple flights. Strip Align for LP360 Drone detects and corrects these errors via an application of sensor-specific mathematical modeling. Strip Align is a fully automated process with no need for users to set project-specific “tuning” parameters or to move in and out of the LP360 Drone processing environment – press a button and it works!

LP360 3D Accuracy

Automated horizontal and vertical checks remove the need for manual interaction

Use 3D Accuracy for:

  • Automatically transform your check point coordinates into you project coordinates including datum and epoch
  • “AutoTarget” – Automatically find a 3D target on a drone dataset
  • Calculation of correction for any 3D target
  • Seamless workflow to apply the correction on the point cloud
  • Use with ground control equipment

Drone Platforms

Our TrueView 3D Imaging Sensors were designed as a lightweight payload to allow flexible integrations on numerous drone platforms. We have worked with several drone providers to provide customers the complete drone mapping solution they are looking for. Don’t see the company you’re looking for, contact our team and we can discuss custom integrations!

Frequently asked questions